More than sensors+automation
Search

Ex(ATEX)

JUMO flowTRANS MAG S01 - Electromagnetic Flowmeter (406012)
JUMO flowTRANS MAG S01 - Electromagnetic Flowmeter (406012) China RoHS-e Ex SIL

  • For the process industry
  • Compact as well as remote mount design
  • Nominal widths DN 3 to DN 2000
  • Nominal pressure up to PN 100
  • Temperatures up to 180 °C
  • Measuring accuracy up to 0.2 % from the measured value

JUMO flowTRANS MAG H01 - Electromagnetic Flowmeter (406015)
JUMO flowTRANS MAG H01 - Electromagnetic Flowmeter (406015) China RoHS-e Ex SIL

  • For hygienic applications
  • Compact as well as remote mount design
  • Nominal widths DN 3 to DN 100
  • CIP/SIP cleanable
  • Nominal pressure up to PN 40
  • Temperatures up to 180 °C
  • Measuring accuracy up to 0.2 % from the measured value

JUMO NESOS R01 LS – Float Switch in Miniature Form (408301)
JUMO NESOS R01 LS – Float Switch in Miniature Form (408301) DNV-GL Ex

  • Point level measurement via floats and reed contact
  • For liquid media irrespective of foam formation, conductivity (permittivity), or pressure ratios
  • Temperature range from -52 to +240 °C
  • Available in numerous versions
  • Approvals for shipbuilding and explosion-protected areas as well as a certificate for the Pressure Equipment Directive (PED)

JUMO NESOS R02 LS – Float Switch Standard Version (408302)
JUMO NESOS R02 LS – Float Switch Standard Version (408302) DNV-GL Ex

  • Point level measurement via floats and reed contact
  • For liquid media irrespective of foam formation, conductivity (permittivity), or pressure ratios
  • Temperature range from -52 to +240 °C
  • Available in numerous versions
  • Approvals for shipbuilding and explosion-protected areas as well as a certificate for the Pressure Equipment Directive (PED)

适用于0/1或20/21区域的带ATEX认证的护套(605057)
适用于0/1或20/21区域的带ATEX认证的护套(605057) China RoHS-e Ex

  • 适用区域 0/1或20/21
  • 提供拧如式和焊接式两种结构
  • 工厂长期备有100、150、200和300mm插深的现货护套产品
  • 可根据实际工况进行定制

JUMO dTRANS p20 DELTA – 带显示器差压变送器 (403022)
JUMO dTRANS p20 DELTA – 带显示器差压变送器 (403022) China RoHS-20 Ex

  • HART®界面
  • 可选防爆等级Ex:ATEX、INMETRO、GOST-R
  • 线性:0.07%
  • 量程可调比:1:200
  • 通过按钮简单操作
  • 特性线与显示同样适用于流量测量
     

JUMO dTRANS p20 DELTA Ex d–带隔爆外壳差压变送器 (403023)
JUMO dTRANS p20 DELTA Ex d–带隔爆外壳差压变送器 (403023) China RoHS-20 Ex

  • HART®界面
  • 可选防爆等级Ex:ATEX、INMETRO、GOST-R
  • 线性:0.07%
  • 量程可调比:1:200
  • 通过按钮简单操作
  • 特性线与显示同样适用于流量测量
     

JUMO dTRANS p20–带显示器差压变送器 (403025)
JUMO dTRANS p20–带显示器差压变送器 (403025) China RoHS-20 DNV-GL Ex Ex NEPSI

  • HART®界面
  • 可选防爆等级Ex:ATEX、INMETRO、GOST-R
  • 线性:0.05%
  • 量程可调比:1:50
  • 通过按钮简单操作
     

JUMO dTRANS p20 [Ex d] – Process Pressure Transmitter with Flameproof Enclosure (403026)
JUMO dTRANS p20 [Ex d] – Process Pressure Transmitter with Flameproof Enclosure (403026) China RoHS-e Ex

  • HART® interface
  • [Ex d] explosion protection according to ATEX, GOST-R
  • Linearity: 0.05 %
  • Turn down: 1:50
  • Simple operation with rotary knob

JUMO dTRANS p02 DELTA Pressure Transmitter with Display (404382)
JUMO dTRANS p02 DELTA Pressure Transmitter with Display (404382) China RoHS-e Ex

Feature: for differential pressure, filling level, and flow

  • 0 to 60 mbar DP to 0 to 25 bar DP
  • Linearity: ≤ 0.1 % of end value
  • Temperature of medium: -40 to +100 °C
  • Load on one and both sides up to a static pressure of 420 bar
  • ATEX approval available as an option

JUMO dTRANS p02 - Pressure Transmitter with Display (404385)
JUMO dTRANS p02 - Pressure Transmitter with Display (404385) China RoHS-e Ex

Feature: for relative pressure, absolute pressure, and level

  • -100 to 100 mbar – -1 to 600 bar relative, 0 to 600 mbar – 0 to 25 bar absolute
  • Linearity: ≤ 0.1 % from end value
  • Long-term stability: < 0.1 % per year
  • Medium temperature: -40 to +200 °C (SIP and CIP capable)
  • ATEX approval available as an option

JUMO MAERA S29 SW - Level Probe out of Titanium (404393)
JUMO MAERA S29 SW - Level Probe out of Titanium (404393) DNV-GL China RoHS-e Ex

  • Level probe for continuous level measurement in liquids
  • Measuring ranges: 100 mbar to 10 bar (1 mWS to 100 mWS)
  • Medium temperature: 0 to 50 °C
  • Accuracy: 0.3 % MSP (linearity)

JUMO MIDAS S21 Ex -用在防爆区域压力变送器(404710)
JUMO MIDAS S21 Ex -用在防爆区域压力变送器(404710) China RoHS-20 Ex

  • ATEX 认证
  • 测量区间 0.25 到 100 bar 表压和绝压
  • 介质温度: -40 to +85 °C
  • 精度:  0.3 % 满量程

JUMO dTRANS p33 - Pressure Transmitter or Level Probe for Use in Ex-Areas (404753)
JUMO dTRANS p33 - Pressure Transmitter or Level Probe for Use in Ex-Areas (404753) China RoHS-20 Metrologisches Zertifikat Ex

  • 压力变送器或者液位计
  • 带ATEX认证
  • 测量范围:250 mbar倒600 bar表压和最高到25bar绝压
  • 测量介质温度: -40 to +85 °C ,最高可测 200 °C
  • 精度:0.5%满量程(线性度)
  • 防护等级:IP65

用作液位计测量液位(IP68)

  • 测量范围:250 mbar 至10 bar(2.5 至100 m WS)
  • 测量介质温度:0- 50 °C

Product comparison level probes

JUMO ex-THERM-AT 表面安装防爆温度开关(605055)
JUMO ex-THERM-AT 表面安装防爆温度开关(605055) China RoHS-20 Ex IECEx SIL

  • 可直接用于1区和2区或21区和22区
  • 标准电器容量16A,最高可选25A
  • 正常工作环境温度范围-55℃~70℃
  • 使用特殊护套,可将护套与温包使用于有爆炸危险的0区
  • 单测量系统温度开关或双测量系统温度开关
     

JUMO exTHERM-DR – Two-State Controller with ATEX and IECEx Approval
JUMO exTHERM-DR – Two-State Controller with ATEX and IECEx Approval China RoHS-e Ex

  • Approval Ex II (1) G [Ex ia Ga] II C, Ex II (1) D [Ex ia Da] III C, Ex II (2) G [Ex eb Gb] IIC, Ex II (2) D [Ex tb Db] IIIC
  • Ignition protection type [Ex ia] with intrinsically safe inputs or [Ex e] with increased safety
  • Controller output (relay)
  • Limit value output (relay) for alarm indication
  • Analog output configurable as actual value output, setpoint value output, or logic output 0/10 V for control of solid state relay
  • LCD display for process information
  • USB interface on front and setup program for simple startup

 

JUMO safetyM STB/STW Ex – Safety Temperature Limiter/Monitor According to DIN EN 14597 and ATEX Approval
JUMO safetyM STB/STW Ex – Safety Temperature Limiter/Monitor According to DIN EN 14597 and ATEX Approval DNV-GL China RoHS-e Ex IECEx SIL DIN DGRL PL

  • Ignition protection type [Ex ia] with intrinsically safe inputs or [Ex e] with increased safety
  • Approval II (1) (2) (3) G (b1) [Ex ia Ga] (e pz] IIC, II (1) (2) (3) D (b1) [Ex ia Da] (p Dc] IIIC, II (1) (1) (2) G (b2) [Ex ia Ga] (e py] IIC, II (1) (1) (2) D (b2) [Ex ia Da] (p DB] IIIC
  • Safety monitor and safety limiter for temperature, pressure, and other process variables
  • Configurable universal input
  • 1oo2D architecture (2-channel structure with diagnostics channel)
  • Approvals according to DIN EN 14597, SIL 3, PL e
  • Security-related limit value relay (230 V, 3 A)
  • Pre-alarm absolute or adjustable as a margin from the limit value
  • Default actual value output
  • Compact solution
  • Ignition source monitoring according to EN 13463 and EN 50495 SIL 2
  • Minimum pressure monitoring SIL 2

JUMO dTRANS T01-两线制变送器(707010)
JUMO dTRANS T01-两线制变送器(707010) Metrologisches Zertifikat China RoHS-e Ex IECEx

  • 适用于B型接线盒安装或top hat 导轨安装
  • 输入类型:热电阻、热电偶信号
  • 输入端、输出端电器隔离
  • 输出信号:4…20mA DC两线制电流信号,可提供带HART协议的型号
  • 可提供本安防爆型
  • 通过安装程序配置
     

JUMO dTRANS T02-四线制变送器(707020)
JUMO dTRANS T02-四线制变送器(707020) Metrologisches Zertifikat China RoHS-e Ex IECEx

  • 设计宽度17.5 mm 或22.5 mm
  • 安装位置:top hat 35 mm导轨安装
  • 可编程通用输入
  • 电器隔离
  • 电流或电压信号输出
  • LCD显示
  • 可提供本安防爆型
  • 可通过软件进行设定
     

JUMO dTRANS T07 –可满足HART®/Ex/SIL双通道温度变送器 (707080)
JUMO dTRANS T07 –可满足HART®/Ex/SIL双通道温度变送器  (707080) UL / CRUUS Ex IECEx SIL

  • 2 路模拟量通用测量输入 (RTD, TC, Ω, mV)
  • 高精度(0.1 K 使用Pt100传感器时)
  • 模拟量输出 4 to 20 mA (单通道, 回路供电)
  • 2 种安装形式 (B型接线盒或DIN导轨)
  • HART® 7 协议
  • SIL 2/3 硬件/软件符合 IEC 61 508
  • 基于传感器监视和设备硬件错误检测的可靠测量模式
  • B型接线盒安装型可选配可插拔显示模块

 

防爆电源中继和输入信号隔离安全栅(707530)
防爆电源中继和输入信号隔离安全栅(707530) China RoHS-e Ex SIL UL listed

  • 适用HART 回路
  • SIL2 认证
  • 通用电源

JUMO PROCESStemp RTD热电阻-用于过程控制(902820)
JUMO PROCESStemp RTD热电阻-用于过程控制(902820) China RoHS-20 Ex IECEx

  • 测量范围 -200至+600°C
  • 保护管:不锈钢、钛、钽、因康镍合金、哈氏合金
  • II 1/2 G Ex ia IIC T1至T6 Ga/Gb¹
  • II 1/2 D Ex ia IIIC T80 °C至T400 °C IP66 Da/Db¹
  • II 1/2 G Ex d IIC T1至T6 Ga/Gb¹
  • II 1/2 D Ex tb IIIC T80 °C至T400 °C IP66 Da/Db¹
  • 可更换插芯(ATEC基础型号不适用)
     

ATEX/IECEx RTD 温度传感器带连接电缆 符合 DIN EN 60751 (902821)
ATEX/IECEx RTD 温度传感器带连接电缆 符合  DIN EN 60751 (902821) Ex IECEx SIL PL

  • 测温范围 -100 ~ +600 °C
  • 可提供单支、双支或三支热电阻,可选两线、三线或四线制
  • 屏蔽连接电缆 (硅胶、聚四氟乙烯PTFE, 金属网/玻璃纤维绝缘, PVC、 PUR、 FEP、RADOX® 或 BETAflam®)
  • 特殊应用设计型号

JUMO Wtrans T变送器-PTD热电阻 带无线数据传输(902930)
JUMO Wtrans T变送器-PTD热电阻 带无线数据传输(902930) China RoHS-20 UL / CRUUS Ex FCC

  • 适用的操作温度为-30至+260℃或 -200至+600℃
  • 适用于移动或静止的温度测量
  • 户外使用的范围为300m
  • 现代无线电技术免去了接线工作
  • 符合EC指令94/9/EC(ATEX)

工业用防爆热电偶(903710)
工业用防爆热电偶(903710) China RoHS-20 Ex

  • 可将控制对象的温度参数变成电信号
  • 用于对系统进行检测、调节和控制

工业用本安防爆热电阻(903720)
工业用本安防爆热电阻(903720) China RoHS-20 Ex

  • 测温范围-200~+600
  • 保护管:不锈钢、钛、钽、因康镍合金、哈氏合金、PTFE涂层、耐磨型
  • 一体化温度变送器可选(4-20Ma/HART®
  • 可提供相关生产/校验证书
  • 插芯可更换
  • 可提供本安防爆和隔爆型产品

Ex "i"—本安防爆热电阻带连接电缆(903730)
Ex "i"—本安防爆热电阻带连接电缆(903730) China RoHS-20 Ex

  • 测温范围:-100至+600℃
  • 可选单支或双支
  • 屏蔽连接电缆(硅胶、PTFE、PVC)
  • 可根据具体应用进行定制

本质型安全湿度,温度传感器(907025)
本质型安全湿度,温度传感器(907025) Ex

用于测量相对湿度和温度

  • 可以选择露点温度,绝对湿度,混合比和湿球温度的计算。
  • 用户友好的模块化测量探头概念
  • 智能交换探头,可保存所有校准系数
  • 耐温 -70 to +180 °C (取决于探头的类型)
  • 耐压高达 100 bar (取决于探头的类型)
  • 带有防护罩(EU)的整机,可在1G类0区和1D类20区的潜在爆炸区域中的安全操作
  • 可追溯到 NIST (包括证书)