More than sensors+automation
Search

总览

Exhaust Gas Temperature Monitor, Type STM-RW-2 (601540)
Exhaust Gas Temperature Monitor, Type STM-RW-2 (601540) China RoHS-20 DIN

  • Rod length expansion
  • Microswitch
  • Automatic reset
  • Breakage protection
  • DIN reg. no. ATW 862

盘装温度开关EM系列高达500℃(602021)
盘装温度开关EM系列高达500℃(602021) China RoHS-20 UL / CRUUS CSA DIN DGRL

  • 液体膨胀
  • 自我监控
  • 安全断流器
  • 带1、2、3或4个微动触点
     

盘装温度开关 JUMO heatTHERM (602031)
盘装温度开关 JUMO heatTHERM (602031) China RoHS-20 UL / CRUUS DIN DGRL

  • 液体膨胀
  • 快速动作的微动开关
  • 温度补偿
  • 安全断流
  • 无镉、符合RoHS标准
     

JUMO heatTHERM P100 – panel-mounted thermostat
JUMO heatTHERM P100 – panel-mounted thermostat

  • Temperature controller (TR)
  • Entry-level class thermostat
  • Simple and quick installation
  • Low space requirement

JUMO heatTHERM P300 – 3-Phase Panel-Mounted Thermostat
JUMO heatTHERM P300 – 3-Phase Panel-Mounted Thermostat

  • 3-phase safety temperature limiter
  • Max. switching capacity 30 A, 480 V
  • Variable electrical connection options
  • Trip-free function
  • Capillary break monitoring

表面安装温度开关ATH系列(603021)
表面安装温度开关ATH系列(603021) China RoHS-20 DIN DGRL

  • 坚固的外壳
  • 微动开关
  • 自动控制(STB/STW)
  • 开关安全断开(STB/STW)
  • 根据DIN EN 14597进行过测试
     

表面安装温度开关ATH系列(603026)
表面安装温度开关ATH系列(603026) China RoHS-20 DIN DGRL

  • 液体膨胀
  • 微动开关
  • 自动控制(STB/STW)
  • 开关安全断开(STB/STW)
  • 两个独立的测量与开关系统
     

表面安装温度开关ATH-SW系列(603035)
表面安装温度开关ATH-SW系列(603035) China RoHS-20 DIN DGRL

  • 液体膨胀
  • 微动开关
  • 一个或两个独立的测量与开关系统
  • 防护等级:IP65
     

JUMO heatTHERM S600 – Surface-Mounted Double Thermostat
JUMO heatTHERM S600 – Surface-Mounted Double Thermostat

  • Efficient startup
  • One central output for the thermowell
  • Temperature monitor (TW) and safety temperature limiter (STB)
  • Self-monitoring through capillary break protection

JUMO heatTHERM-AT系列-表面安装温度开关 (603070)
JUMO heatTHERM-AT系列-表面安装温度开关 (603070) China RoHS-20 UL / CRUUS DIN DGRL UL listed

  • 液体膨胀
  • 快速动作的微动开关
  • 温度补偿
  • 快速插头
  • UL认证可行
     

表面安装温度开关AMTHF系列(603051)
表面安装温度开关AMTHF系列(603051) China RoHS-20 DGRL

  • 液体膨胀
  • 带快速动作系统的微动开关
  • 2个、3个或4个连动触点
     

JUMO frostTHERM-AT/DR系列 防冻温度开关(604100)
JUMO frostTHERM-AT/DR系列 防冻温度开关(604100) China RoHS-20

  • 快插连接技术
  • 最大开断容量 16A、230V
  • 防护等级  (AT) IP40-IP65
                    (DR) IP20

JUMO frostTHERM-ATE (604170)
JUMO frostTHERM-ATE (604170) China RoHS-e

  • Setting range +1 to +10 °C
  • Operating mode: manual or automatic reset
  • Membrane heating for operation up to -15 °C
  • Self-monitoring of the probe line
  • Two analog outputs 0 to 10 V
  • One switching output (relay: max. AC 230 V 6(2) A)
  • Can be set without opening the case lid
  • Electrical connection via tension spring terminals
  • Operating voltage (SELV) AC 24 V

Hot air thermostats, model WTHc (60.4514)
Hot air thermostats, model WTHc (60.4514) China RoHS-20 DIN

  • Fluid expansion
  • Micro switch
  • 3 separate measuring and switching systems
  • Sturdy case

JUMO ex-THERM-AT 表面安装防爆温度开关(605055)
JUMO ex-THERM-AT 表面安装防爆温度开关(605055) China RoHS-20 Ex IECEx SIL

  • 可直接用于1区和2区或21区和22区
  • 标准电器容量16A,最高可选25A
  • 正常工作环境温度范围-55℃~70℃
  • 使用特殊护套,可将护套与温包使用于有爆炸危险的0区
  • 单测量系统温度开关或双测量系统温度开关
     

Contact dial thermometer (60.8425)
Contact dial thermometer (60.8425) China RoHS-20 Metrologisches Zertifikat

  • Capillary measuring system
  • Any installation position
  • Round version with stainless steel housing
  • Class 1

电接点度盘式温度计 MICROSTAT-M(608501)
电接点度盘式温度计 MICROSTAT-M(608501) China RoHS-20 Metrologisches Zertifikat

  • 毛细管测量系统
  • 温度控制器
  • 塑料外壳(标准)
  • 适用于表盘安装
     

接触度盘式温度计(608520)
接触度盘式温度计(608520) China RoHS-20 Metrologisches Zertifikat

  • 毛细管测量系统
  • 不锈钢外壳可以安装在面板上或附加设备上
  • 反扭结发条
  • 适用于面板安装
     

Contact dial thermometer (60.8523)
Contact dial thermometer (60.8523) China RoHS-20

  • Capillary measuring system
  • Stainless steel case with bayonet connection
  • Panel-mounting/add-on device
  • Anti-kink spring
  • Protection class IP65

Contact dial thermometer (60.8540)
Contact dial thermometer (60.8540) China RoHS-20

  • Capillary measuring system
  • UV-stabilized polyamide case
  • Optionally with fly back

Hygrostat (Hygrometric) (907032)
Hygrostat (Hygrometric) (907032)

For easy two-state control of relative air humidity

  • For indoor and duct versions
  • Also available with covered setpoint adjuster
  • Duct version can be used continuously in areas of high humidity
  • Indoor version also suitable for flush-mounted box installation
  • With potential-free changeover contact(s)
  • No voltage supply required (passive operation)
  • Sensing element is maintenance-free when operated in a clean environment