RTD 温度传感器
JUMO HEATtemp – Screw-In RTD Temperature Probe for Heat Meters with Terminal Head for Direct Mounting (Type DL) (902427)
- For temperatures from 0 to 180 °C
- Type examination certificate for MID heat meters as replaceable temperature probes
- Fulfills the requirements of DIN EN 1434, AGFW FW 202, and FW 211
- Pairing and declaration of conformity according to MID
- Production certified according to module D (MID) (CE and metrology identification marking)
JUMO HEATtemp – Push-In RTD Temperature Probes for Combined Cold and Heat Meters with Terminal Head for Thermowells (Type PL) (902464)
• For temperatures from 0 to 120 °C (cold) and 0 to 180 °C (heat)
• Type examination certificate for cold meters and combined cold/heat meters
• Fulfils the requirements of DIN EN 1434, AGFW FW 202, and FW 211
• Pairing and declaration of conformity according to the German Weights and Measures Act and according to MID
• Production certified according to module D (MID) (CE and metrology identification marking)
• Adapted accessories for installation (data sheet 902440 and 902442)
JUMO plastoSENS T01 – Voltage-resistant plastic temperature probe (904001)
- For temperatures from -40 to +200 °C
- Nominal voltage up to AC 3.5 kV (test voltage: DC 8 kV for 1 minute)
- Standardized, voltage-resistant temperature sensor, e.g. for transformers
- Electrically insulating and heat conducting at the same time
- Fields of application: Transformers, generators, voltage rails and combined heat and power plants etc.
JUMO plastoSENS T02 – Vibration-Resistant Plastic Temperature Probe (904002)
• For temperatures from -40 to +180 °C
• Vibration and shock-resistant
• Shock-resistant – thanks to temperature sensor that is completely surrounded by plastic
• Can be used in almost all liquids – even in chemicals
• High-performance plastic favors low natural frequency in case of oscillation, resulting in higher
load capacity for the temperature probe
• Breakage resistance due to stable temperature sensor
• Can be used for motor oils, fuels, battery acids, AdBlue®, etc.
JUMO plastoSENS T03 – Steam-Tight Plastic Temperature Probe (904003)
• For temperatures from 0 to 150 °C
• Protection type IP69K – steam-tight even at the cable outlet
• Absolute leak-tightness – through injection molding process the applied special plastics
form a substance-to-substance bond which guarantees the steam tightness
• Application areas: autoclaves, steam sterilizers, CIP and SIP cleaning
(depending on the type of applied chemicals)